Long Knife Blade Sharpening Jig Tormek SVM-140. The Long Knife Jig That Handles Longer, Thinner Knives and Works With Your Tormek Sharpening System T-7, T-4, T-3, etc.


Tormek had made all kinds of jigs for sharpening knives. But longer, thinner knives presented a problem, and our customers who had those types of blades asked us for help. We’ve responded with the SVM-140, which is a knife sharpening jig specifically designed for those longer, thinner, and even flexible knife blades. Filleting knives, longer paring knives, or any type of longer knife can be sharpened with this versatile jig. It utilizes a larger support width (5 ½”), making it perfect for any knife with a length over 6 ¼”. You simply adjust the jig for the blade’s thickness, and set the angle. Everything locks into place, and you now have a solid, stable platform to perform your sharpening. Like all Tormek products, this is designed to give you the best edge while losing the least amount of metal, making your knives last longer. And that edge… dare we say you’ll be impressed?

Tormek SVM-140 Long Knife Jig is developed especially for long, thin and flexible knives, such as filleting knives. Its larger width, 5-1/2 inches, stabilizes a long and thin blade and can cope with blades longer than 6-1/4 inches. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig is comprised of an adjustable clamp for holding knives up to 3/16" (5mm) thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw and lock the tool by tightening the knob. The jig rests on the Universal Support, which is placed vertically for grinding towards the edge. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support.
  • Imported
  • Made for Long, Thin, Flexible Knives
  • It's Width can Stabilize and Support Longer Blades
  • Works the Same Way as the SVM-45
  • Adjustable Clamp and Stop
  • Rests on the Universal Support